100 in stock
Bulk Purchase? Reach us for special price
Free shipping all over India
Ask a question?
Honeywell Sensepoint XCD O2 Fixed Gas Detector Users can modify detector operation using the LCD and magnet switches without ever needing to open the unit. This enables one-man, non-intrusive operation and reduces routine maintenance time and costs.
Features of Honeywell Sensepoint XCD O2 Fixed Gas Detector:
- Honeywell Detector is user friendly and intuitive tri-color backlit display with digits, bar graphs, and icons.
- Different types of versions available such as Flammable, toxic, and oxygen.
- It has a stainless steel or aluminum explosion-proof housing options.
- IP66 as standard.
- SurecellTM electrochemical sensors.
- It has long life sensors.
- Optional remote sensor mounting available.
- MODBUS communications for remote diagnostics/configuration
- It is Fully configurable via magnetic switches
|Target Gases||Oxygen (O2)|
|Measurable Range||10.0 to 100.0ppm|
|1st alarm limit||10ppm|
|2nd alarm limit||20ppm|
|Operating Temperature||-20° to 55°C|
|Power Supply||Sensepoint XCD is supplied complete with integral wall mounting plate, 2 x M20 cable entry (ATEX/IECEx) or 2 x ¾”NPT conduit entries (UL/cUL),|
|Input Voltage Range||12 to 32VDC (24VDC nominal)|
|Max Power Consumption||Maximum power consumption is dependent on the type of gas sensor being used. Electrochemical cells = 3.7W, IR = 3.7W and catalytic = 4.9W. Maximum inrush current = 800mA at 24VDC|
|Current Output||Sink or source|
|Relays||3 x 5A@250VAC. Selectable normally open or normally closed (switch) and energized/de-energised (programmable) Alarm relays default normally open/de-energized. Fault relay default normally open/energized|
|Communication||RS485, MODBUS RTU|
|Material||• Housing: Epoxy painted aluminium alloy ADC12 or 316 stainless steel • Sensor: 316 stainless steel|
|Mounting||Integral mounting plate with 4 x mounting holes suitable for M8 bolts. Optional pipe mounting kit for horizontal or vertical pipe Ø1.5 to 3" (2" nominal)|
|Cable Entry||ULcUL versions: 2 x ¾”NPT conduit entries. Suitable blanking plug supplied for use if only 1 entry used. Seal to maintain IP rating; ATEX/IECEx versions: 2 x M20 cable entries|
|IP Rating||IP66 in accordance with EN60529:1992|
|EMC||CE: EN50270:2006 EN6100-6-4:2007|
|Weight||• Aluminium Alloy LM25: 2.0kg • 316 Stainless Steel: 5.0kg|