JUMO 202613 Optical Sensor for Dissolved Oxygen

(GST 18% Exclusive)

100 in stock

Product Id: 3103

JUMO eco Line O-DO optical sensor for dissolved oxygen for measuring dissolved oxygen in fluid arrangements and serves in as an expansion to existing JUMO frameworks by giving the DO content. The optical membrane cap is easy to replace, meaning the sensor is very easy to maintain. The current calibration data is saved directly in the sensor electronics.

Applications: Municipal and industrial sewage treatment plants, Drinking water monitoring, Water protection, Fish farming companies, Process plants

 

Request to Quote Image

JUMO Optical Sensor for Dissolved Oxygen can store the alignment information, making it perfect for dynamic estimating situations, for example, sewage treatment, drinking water control, angle ranches, and comparable. It works over a measuring range from 0 to 20 mg/l and temperatures up to 60 °C. It depends on the visual estimation system (radiance technique). The device is solid, made out of hardened steel, is vigorous, with no requirement for support.

Features of UMO ecoLine O-DO – Optical Sensor :

  • Suitable for indicating device/controller according to T202569
  • Greater calibration intervals due to lower drift behavior
  • High measuring accuracy even for low concentrations
  • Short response time
  • No minimum inflow (no oxygen consumption)

Additional information

Weight 2 kg
Manufacturer

JUMO

Model No

Type 202613

Dissolved oxygen

0 to 20.0 mg/L

Accuracy_1

±0.1 mg/l

Resolution_1

0.01

Current consumption

Standby: 25 μA RS485 on average: 4.4 mA (at 1 measurement/s) Current pulse (starting current peak): 100 mA

Operating Temperature

0 to 50 °C

Storage Temperature

-10 to 50˚C

Response Time

t90 < 60 s

Measurands

Dissolved oxygen Temperature

Material Of Construction

Sensor shaft and membrane cap: stainless steel 316L Cable bushing: polyamide Membrane: silicone

Measuring principle

Optical measurement according to the principle of luminescence quenching

Max. sampling rate for measured values

1 Hz

Voltage

DC 5 to 12 V

Signal Interfernce

RS485 interface with Modbus RTU protocol

Luminophore operating life (DO Disk)

Approx. 2 years depending on the sampling rate of the display unit

Temperature compensation

Via integrated NTC, in the range from 0 to +40 °C

Air pressure compensation

500 to 1100 hPa (entered on display unit/controller)

Salinity compensation

0 to 60 g/kg (entered on display unit/controller)

Cable Length

Max. 30 m

Weight

827(Sensor including 10m Cable); 1984 (Sensor including 10m cable)

Be the first to review “JUMO 202613 Optical Sensor for Dissolved Oxygen”

Reviews

There are no reviews yet.

Optical Sensor, JUMO Optical Sensor for Dissolved Oxygen

JUMO 202613 Optical Sensor for Dissolved Oxygen

(GST 18% Exclusive)

Add to Cart