Meco 36-Auto BL Clamp Meter
₹4,373.73
(GST 18% Exclusive)
Meco 36-Auto BL Clamp Meter is an electrical meter with an integral AC current clamp. It is also known as a clamp-on ammeter or tong tester.
Application: Industrial applications.
Customers who bought this item also bought
-
₹5,469.92(GST 18% Exclusive)
Meco 3690 Auto Digital AC/DC Clamp Meter
-
₹3,292.00(GST 18% Exclusive)
Meco 1008 TRMS Digital AC/DC Clamp Meter
-
₹41,706.00(GST 18% Exclusive)
Fluke 365 Digital True RMS Clamp Meter
-
₹5,139.65(GST 18% Exclusive)
Meco 1080 TRMS Digital AC/DC Clamp Meter
-
₹1,470.77(GST 18% Exclusive)
Meco 27-Auto Digital AC Clamp Meter
Meco 36-Auto BL Clamp Meter measures the vector sum of the currents flowing in all the conductors passing through the probes. Only one conductor is normally passed through the probe. In particular, if the clamp is closed around a two-conductor cable carrying power to equipment, the same current flows down one conductor, and up the other then the meter correctly reads a net current of zero.
Features Meco 36 Clamp Meter:
- Display: 3¾ digit liquid crystal display (LCD) with a maximum reading of 3999
- Polarity: Automatic, positive implied, negative polarity indication.
- Overrange : (OL) or (-OL) is displayed.
- Zero: Automatic.
- Battery Life: 200 hours typical
Additional information
| Weight | 1 kg |
|---|---|
| Manufacturer | MECO |
| Model No | 36 |
| Measuring Parameters | AC Current, AC Voltage, Capacitance, DC Current, DC Voltage, Duty Cycle, Frequency, Resistance, Temperature |
| AC Current | 40 A, 400 A |
| Accuracy_1 | ±(2.5% rdg +5dgt) on 400A, ±(2.5% rdg +8dgt) on 40A |
| DC Current | 40 A, 400 A |
| Accuracy | ±(3% rdg +3dgt) |
| Overload | 600A DC max. for 1 min. |
| DC Voltage | 400mV to 600V |
| Accuracy_2 | ±(0.8%rdg+3dgt) |
| AC Voltage | 4 V |
| Accuracy_3 | ±(1.2%rdg+3dgt) |
| Temperature | -200C to 7500C |
| Accuracy_4 | ±(3%rdg+5dgt) |
| Capacitance | 40nF to 200uF |
| Accuracy_5 | ±(3%rdg+2dgt), ±(5%rdg+8dgt) for 200µF |
| Resistance | 0 to 40 MOhms |
| Accuracy_6 | ±(1%rdg+3dgt) |
| Frequency | 10Hz to 10MHz |
| Accuracy_7 | ±(0.5%rdg+2dgt) |
| Duty Cycle | 0.1% – 99.9% |
| Accuracy_8 | Reference only |
| Operating Temperature | 0° to 50°C |
| Relative Humidity | Less than 80% RH |
| Audible Continuity | 30VApprox |
| Diode Test | 1.0 ±0.6mA Approx |
| Jaw opening | 25 mm |
| Power | 1.5 V AAA Batteries |
| Accessories | One Pair of test leads, Instruction Manual, Carrying Case, Battery Installed, K Type Thermo Couple (Upto 260°C). |
| Display | 3½ Digit LCD Display with 4000 Counts. |
| Weight | 170 Grams |
DS_Meco 36-Auto BL Digital Clamp Meter_Ver 1.0
Reviews
There are no reviews yet.