• 8,500.00

    Siemens RDF302 Thermostat

    Siemens RDF302 Thermostat, the RS 485 communications room thermostat, uses the Modbus protocol, allowing you to set your desired ideal room temperature. The thermostat offers a mode for Comfort, Economy, and Safety.

    Application: Hotel, Shopping Mall, Hospital, School, Commercial, or residential indoor temperature control.

  • Siemens TH100 Head Mounted Temperature Transmitter

    Brand:Siemens

    Siemens TH100 Head Mounted Temperature Transmitter is an economical device used for Pt100 measurements in all industries. This Siemens Head Mounted Temperature Transmitter has a compact size and can be installed in connection heads of type B or larger. The output signal is a load-independent direct current of 4 to 20 mA which is proportional to the temperature. For the parameterization, the SIPROM T software is used in combination with the modem for SITRANS TH100. Its compact design makes this Temperature Transmitter suitable for retrofitting measuring points or replacing analog transmitters. The transmitter is available in a non-Ex version and in a version that is suitable for use in hazardous areas.
    Applications: Refining, petrochemical, power, and energy industries.

  • 8,110.179,240.00

    Siemens® QBM2030 5 Differential Pressure Sensor

    Siemens QBM2030-5 Differential Pressure Sensor is used to measure the slightest differential pressures variation in ventilation and air conditioning ducts, also Monitoring filters and control fans with output available in the device. The siemens pressure sensor acquires differential, over and under the pressure of air and nonaggressive gases.

    Applications: This pressure sensor is widely used in HVAC applications for measuring the difference between positive and negative pressure. Measuring the smallest differential weights in ventilation and cooling channels, Pharmaceutical Clean Rooms, and AHU applications Check wind streams, Monitor channels, and control fans

  • 13,355.0064,960.00

    Siemens® QBM3020-1D Air Duct Differential Pressure Sensor With Display

    Siemens® QBM3020-1D Air Duct Differential Pressure Sensor acquires the differential pressure using a silicon rubber membrane and ceramic bar. Depending on the type of sensor, the sensor generates a linear or extracting-the-root signal, which is calibrated and compensated for temperature. The individual adjustment of the pressure measurement range for extracting the-root sensor is done by means of a potentiometer
    Applications: HVAC, Pharmaceuticals, HVAC-R, Hospitals, Laminar Flow, Clean Room, Bio Labs.

  • 4,464.0042,660.00

    Siemens® QBM81-5 Differential Pressure Monitor

    Siemens® QBM81-5 Differential Pressure Monitor uses proven sensing technology to deliver accurate and repeatable data in applications that require monitoring of differential pressure.QBM Series Differential Pressure Devices can be used in a wide range of applications where differential air pressure monitoring is required.
    Applications: HVAC, Cleanrooms, HEPA Filter,  Prevailing Airflows,Laminar Flow.

  • 12,366.00

    Siemens® QFA 2071 Temperature and Humidity Room Sensor

    Siemens® QFA 2071 Temperature and Humidity Room Sensor is used for continious monitoring of critical parameters like Temperature, Relative Humindity in air conditioning, and ventilating plants. This Room sensor can also be used as a control sensor and measuring sensor for building automation and control systems or indicating units.
    Applications: HVAC, IT Companies, Commercial Buildings, etc.

  • 9,809.32

    Siemens® QFM2100 Duct Sensor

    Siemens® QFM2100 Duct Sensor acquires the relative humidity in the air duct via its capacitive humidity sensing element whose electrical capacitance changes as a function of the relative humidity. This sensor acquires the temperature in the air duct via its sensing element whose electrical resistance changes as a function of the temperature.

     

  • 10,858.0052,350.00

    Siemens® QFM2171 Duct Sensor

    Siemens® QFM2171 Duct Sensor transmits changes in humidity and temperature to the building control systems. These sensors are mainly suitable for applications where precise, stable humidity sensing is required.
    Applications: Air Ducts, HVAC Systems, etc.

  • 1,820.00

    Subzero SZ-7510P Temperature Controller

    Subzero SZ-7510P Temperature Controller is a single setpoint controller with digital input. These temperature transmitters are specifically designed for refrigeration applications where the compressor cuts off at a set point and is restarted at a temperature of setpoint plus differential.
    Appliances: Display cabinet, Pantry cabinet, Steam bath systems, and Chillers.

  • 2,450.00

    Subzero SZ-7524P Digital Temperature Controller

    Subzero SZ-7524P Digital Temperature Controller is an aesthetically superior version of their predecessors. The SZ 7515/25-P is a single setpoint controller with a buzzer.
    Applications: Temperature & process indication, Plastics molding/extrusion temperature monitoring, Heat treatment – furnace temperature monitoring, Chillers, Water heating boilers, Oven Control, Pressure/ Level/ Flow Monitoring.

  • 1,185.002,085.00

    Subzero SZ7510 Temperature Controller

    Brand:Subzero

    Subzero SZ7510 Temperature Controller is a single setpoint controller with a buzzer.  This digital Temperature controller is specifically designed for refrigeration applications wherein the compressor cuts off at a set point and is restarted at a temperature of setpoint plus differential.
    Applications Temperature Control System: Heating applications, Refrigeration applications.

  • 2,200.00

    Subzero SZ7515P Digital Temperature Controller

    Brand:Subzero

    Subzero SZ7515P Digital Temperature Controller is an aesthetically superior versions of their predecessors. SZ 7515/25-P is a single setpoint controller with a buzzer. SZ 7520/25-P is a defrost controller and 7529-Pis also a defrost controller with an inbuilt power relay which can drive compressor loads directly up to 20Amps, thereby eliminates contactors in single-phase applications. They are specifically designed for refrigeration applications wherein the compressor cuts off at a set point and is restarted at a temperature of setpoint plus differential.

    Applications: Chiller Machines, Lab Equipments, Display Cabinets.