-
₹17,700.00Honeywell GD250 Carbon Monoxide Detector
Honeywell GD250 Carbon Monoxide Detector is an IAQ(Indoor Air Quality) sensor, which has been intended to recognize carbon monoxide gas noticeable all around and has high exactness at low focus. Favorable position of this model is its minimized size and simple installation.
Applications: Chemical industry, Meat Coloring, Medicine, Metallurgy, Laser and so forth.
-
₹643,100.00Honeywell ppbRAE 3000 Handheld PID VOC Monitor
Honeywell ppbRAE 3000 Handheld PID VOC Monitor is a thorough VOC gas monitor and data logger for dangerous situations. The Honeywell ppbRAE 3000 is the most advanced handheld VOC monitor accessible for parts-per-billion recognition. This third-generation licensed PID gadget monitors VOCs using a photo-ionization detector with a 9.8 eV, 10.6 eV UV-discharge lamp.
Applications: Clean Room, Paint Applications, Industries, Indoor Air Monitoring -
₹73,631.78Honeywell Toxirae Pro H2S Single Gas Monitor
Honeywell Toxirae Pro H2S Single Gas Monitor is the world’s first wireless personal monitor for toxic gases and oxygen. It can detect a broad range of gases—from carbon monoxide, hydrogen sulfide, and oxygen to ammonia, chlorine, and formaldehyde.
Application: (Petro)chemical plants and factories, Tank storage parks, Wastewater treatment facilities, Mining industry, Construction sites, Food, and beverage industries.
-
₹118,800.00 – ₹200,642.00Honeywell ToxiRAE Pro PID VOC Monitor
Honeywell ToxiRAE Pro PID VOC Monitor is a convenient photo ionization indicator. Including RAE Systems’ cutting edge PID sensor, the ToxiRAE Pro PID can speedily distinguish and accurately monitor more than 300 VOCs.
Applications: Clean Room, Paint Applications, Industries, Indoor Air Monitoring -
₹16,142.37HTC CO-1 Carbon Monoxide Meter
HTC CO-1 Carbon Monoxide Meter is a device that detects the presence of carbon monoxide (CO) gas to prevent carbon monoxide poisoning in human intervention areas like industries etc. This Co Meter applies to all CO safety alarms that meet UL 2034; however, for passive indicators and system devices that meet UL 2075, UL refers to these as carbon monoxide detectors. CO is a colorless, tasteless, and odorless compound produced by the incomplete combustion of carbon-containing materials.
Applications: Measure CO levels in business structures, private abodes where amassing of burning gas is conceivable, Transportation, and Industries.
-
Kitagawa Gas Detector Tube System
Kitagawa Gas Detector Tube System is a detecting tube that is designed to measure accurate gas range readings in minutes. Kitagawa Gas Tubes are user-friendly, safe, and easy to measure the gas and its ranges. No power supply and Calibration are required for these Gas Detecting tubes and low-cost analysis for your gas detection needs.
Applications: Labs, Pharmaceuticals, biochemical industries, etc.
-
₹11,563.56Lutron GCO 2008 Carbon Monoxide Meter
Lutron GCO 2008 Carbon Monoxide Meter makes it simple to take fast and accurate readings of CO levels and Temperature. It is one of the best and most accurate device to measure concentration of carbon monoxide and Temperature in atmosphere.
Applications: Measure CO levels and temperature inside spaces, for example, modern situations, business structures, or private abodes where amassing of burning gas is conceivable, Transportation, Industries.
-
MSR MA-3-2089-X-F Ethylene Analog Transmitter
MSR Ethylene (C2H4) Analog transmitter is for monitoring of gas and vapors in the ambient air. It is used for cold storage, ripening chamber, refrigerant vehicles, etc. The μ-Gard analog transmitter series MA is a reliable gas detector.
Applications : industry, agriculture, and other areas requiring precise measurement of ethylene concentration.
-
MSR MC2 NH3 Gas Sensor Transmitter
MSR MC2 PH3 Gas Sensor Transmitter houses a module with µController, analog output and power supply in addition to the electrochemical sensor element including amplifier. The µController calculates a linear 4 – 20 mA (or 2 – 10 V) signal out of the measurement signal and also stores all relevant measured values and data of the sensor element.
Applications:
The µGard®2 Sensor MC2 is used for the detection of toxic gases or for oxygen monitoring wherever a typical 4 – 20 mA (or 2 – 10 V) signal is required.
-
Senko SI-100 Ammonia Gas Detector
Senko SI-100 Ammonia Gas Detector installed in a place where a potential gas hazard exists to measure Ammonia(lel). It not only shows the concentration of gas but also diagnostic results of the unit itself through the LCD display and can be connected to the controller with a standard 4-20mA analog output communication or RS-485 digital communication.
Applications: Steelworks, petrochemical, refining, shipbuilding, wastewater treatment plants and septic, mining, power, agency.
-
Senko SI-100 Carbon Dioxide Gas Detector
Senko SI-100 Carbon Dioxide Gas Detector typically finds its place in human-environmental related applications. It shows the concentration of CO2 in ppm levels and alerts users when the setpoints are violated. This senko gas detector has the capability of controlling an external motor, exhaust, etc. at user-defined set points. Other important feature includes 4-20mA output and optional communication of RS485 to integrate with BMS systems.
Applications: Workspace, Educational Institutions, Labs, Chemical & Bulk Drugs Steelworks, petrochemical, refining, shipbuilding, wastewater treatment plants and septic, mining, power, agency.
-
Senko SI-100 Carbon Monoxide Gas Detector
Senko SI-100 Carbon Monoxide Gas Detector is a fixed type gas detector that gives continuous readings of carbon monoxide concentration in a particular area. The LCD display makes it easier for users to view the ppm levels locally. The instrument is also equipped with standard 4-20mA analog output communication or RS-485 digital communication for PLC/SCADA integration.
Applications: Steelworks, petrochemical, refining, shipbuilding, wastewater treatment plants and septic, mining, power, agency.
Shop By Category
- Air Quality Monitors
- Ammeter and Voltmeter
- Calibrators
- Caliper
- Clean Room Instruments
- Data Loggers
- Digital Pressure Gauge
- Electronic Pressure Gauge
- Environmental Meters
- Fire and Safety
- Flameproof Instruments
- Gas Detectors
- Gas Detectors
- Gas Detector Tubes
- Air Capture Hood Meters
- Air Flow Meters
- Air Velocity Transmitters
- Air Flow
- Air Quality-PM2.5/PM10/TVOC/HCHO
- Current/Voltage/Resistance/EMF
- Differential Pressure
- Dissolved Oxygen
- Distance
- Fire / Escape / Underwater
- Gases
- Airborne Particle Counters
- Analog Pressure Gauges
- Digital Pressure Controllers
- Digital Pressure Indicators
- Digital Pressure Transmitters
- Clamp Meter
- Dissolved Oxygen Meters
- Distance Meters
- Gauss Meters
- Data Loggers
- Differential Pressure
- Differential Pressure Controllers
- Differential Pressure Indicators
- Differential Pressure Transmitters
- Digital Vacuum Controllers
- Digital Vacuum Indicators
- Digital Vacuum Transmitters
- Dosimeter
- Gamma Camera
- Fixed Gas Detector