Bulk Purchase? Reach us for special price
Free shipping all over India
Ask a question?
Ace AI-DP1-LCD Differential Pressure Indicator Transmitter is a part replacement for the analog Magnehelic gauges & is easy to use with clear Graphic Backlit 128 x 64 LCD display. This Differential Pressure Indicator accompanies a worked-in sensor and additionally a buzzer alarm with an affirmation office for procedure infringement alert.
Features of Differential Pressure Indicator Transmitter :
- This Differential Pressure Indicator Transmitter Incorporate unit transformation at the press of a key between mm. W.C. and Pascals.
- Incorporated signal caution for set point infringement
- Balance arrangement to meet review necessities
- Simple 4-20ma yield, 30 mm.
- Profundity for cleanroom measured divider fitment and RS 485 Modbus correspondence for BMS/SCADA/PLC incorporation.
|Differential Pressure Range||-0.72 to +0.72 In wc, -18.0 to +18.0 mm.wc, -180 to 180 pascal|
|Resolution_1||1 Pascals / 0.1 mm.W.C.|
|Accuracy_1||+/-0.5% of Full Scale|
|Maximum Over Pressure||2 Times the rated pressure|
|Sensors||Integrated High Speed Differential Pressure Sensor|
|Alarms||Built In High & Low Buzzer Alarm for Process Set Parameter Violation with Acknowledgement Key|
|Medium||Air or Gases ( Non Corrosive )|
|Communication||Isolated RS485 Modbus Protocols(Optional)|
|Connection||2 Nos. Hose Nipples of 4mm. Stainless Steel at the Back|
|Construction||M.S. Powder Coated Body with Stainless Steel Front Flush Plate for Modular Wall Fitment in Clean Rooms|
|Display||Graphic Backlit 128 x 64 LCD|
|Power||24 Volts D.C. Typical|
|Calibration||Will be provided at no extra cost valid for 1yr traceable to Electronic Test & Development Centre.|
|Dimensions||Instrument Enclosure is in 100×90×30 mm. (W×H×D)|